ERROR DE SISTEMA "failed to initialize HAL!"

Ahí quería yo llegar, a que me pidiese alguien que pegase algo para una receta en plan ARGUIÑANO. Si es que Guada es posible para TOD@S. Para quienes quieren aprender Informática y para quienes, como yo, lo que queremos es que nos funcione la máquina al TUTTI PLEN (a veces aprendiendo, a veces de vacaciones sin nada que querer aprender, AJAJAJAJAJAJAJAJ!!!!!).

Pues pego aquí la última hora:

Oye, con la salida que me da mejor te paso mi disco duro y te lo metes en un externo, AJAJAJAJAJAJAJ!!!!!

AHÍ VA (No he reparado en mandarlo tal cual, si veis que mis contraseñas y todos mis archivos son transparentes pues me lo decís y modifico "edito" lo EDITABLE. Pero recuerdo que estoy de vacaciones y no me quiero complicar mucho la vida, sólo dejar mi guada a la Última Moda y sin conflictos.

Muchas gracias.

SALIDA A dmesg



[    0.000000] Linux version 2.6.20-16-generic (root@terranova) (gcc version 4.1.2 (Ubuntu 4.1.2-0ubuntu4)) #2 SMP Tue Feb 12 05:41:34 UTC 2008 (Ubuntu 2.6.20-16.35-generic)
[    0.000000] BIOS-provided physical RAM map:
[    0.000000] sanitize start
[    0.000000] sanitize end
[    0.000000] copy_e820_map() start: 0000000000000000 size: 000000000009f800 end: 000000000009f800 type: 1
[    0.000000] copy_e820_map() type is E820_RAM
[    0.000000] copy_e820_map() start: 000000000009f800 size: 0000000000000800 end: 00000000000a0000 type: 2
[    0.000000] copy_e820_map() start: 00000000000f0000 size: 0000000000010000 end: 0000000000100000 type: 2
[    0.000000] copy_e820_map() start: 0000000000100000 size: 000000001bef0000 end: 000000001bff0000 type: 1
[    0.000000] copy_e820_map() type is E820_RAM
[    0.000000] copy_e820_map() start: 000000001bff0000 size: 0000000000003000 end: 000000001bff3000 type: 4
[    0.000000] copy_e820_map() start: 000000001bff3000 size: 000000000000d000 end: 000000001c000000 type: 3
[    0.000000] copy_e820_map() start: 00000000fec00000 size: 0000000001400000 end: 0000000100000000 type: 2
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
[    0.000000]  BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 000000001bff0000 (usable)
[    0.000000]  BIOS-e820: 000000001bff0000 - 000000001bff3000 (ACPI NVS)
[    0.000000]  BIOS-e820: 000000001bff3000 - 000000001c000000 (ACPI data)
[    0.000000]  BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
[    0.000000] 0MB HIGHMEM available.
[    0.000000] 447MB LOWMEM available.
[    0.000000] found SMP MP-table at 000f5310
[    0.000000] Entering add_active_range(0, 0, 114672) 0 entries of 256 used
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA             0 ->     4096
[    0.000000]   Normal       4096 ->   114672
[    0.000000]   HighMem    114672 ->   114672
[    0.000000] early_node_map[1] active PFN ranges
[    0.000000]     0:        0 ->   114672
[    0.000000] On node 0 totalpages: 114672
[    0.000000]   DMA zone: 32 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 4064 pages, LIFO batch:0
[    0.000000]   Normal zone: 863 pages used for memmap
[    0.000000]   Normal zone: 109713 pages, LIFO batch:31
[    0.000000]   HighMem zone: 0 pages used for memmap
[    0.000000] DMI 2.3 present.
[    0.000000] ACPI: RSDP (v000 P4M80P                                ) @ 0x000f6c60
[    0.000000] ACPI: RSDT (v001 P4M80P AWRDACPI 0x42302e31 AWRD 0x01010101) @ 0x1bff3040
[    0.000000] ACPI: FADT (v001 P4M80P AWRDACPI 0x42302e31 AWRD 0x01010101) @ 0x1bff30c0
[    0.000000] ACPI: MADT (v001 P4M80P AWRDACPI 0x42302e31 AWRD 0x01010101) @ 0x1bff6700
[    0.000000] ACPI: SSDT (v001  PmRef  Cpu0Ist 0x00003000 INTL 0x20040311) @ 0x1bff67d0
[    0.000000] ACPI: SSDT (v001  PmRef    CpuPm 0x00003000 INTL 0x20040311) @ 0x1bff6c60
[    0.000000] ACPI: DSDT (v001 P4M80P AWRDACPI 0x00001000 MSFT 0x0100000c) @ 0x00000000
[    0.000000] ACPI: PM-Timer IO Port: 0x4008
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[    0.000000] Processor #0 15:4 APIC version 20
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[    0.000000] Processor #1 15:4 APIC version 20
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled)
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 2, version 3, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Enabling APIC mode:  Flat.  Using 1 I/O APICs
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] Allocating PCI resources starting at 20000000 (gap: 1c000000:e2c00000)
[    0.000000] Detected 3210.032 MHz processor.
[   19.977978] Built 1 zonelists.  Total pages: 113777
[   19.977985] Kernel command line: root=UUID=91dc4445-de9b-4107-af50-6cd2f8441939 ro quiet splash locale=es_ES
[   19.978154] mapped APIC to ffffd000 (fee00000)
[   19.978157] mapped IOAPIC to ffffc000 (fec00000)
[   19.978161] Enabling fast FPU save and restore... done.
[   19.978164] Enabling unmasked SIMD FPU exception support... done.
[   19.978181] Initializing CPU#0
[   19.978306] PID hash table entries: 2048 (order: 11, 8192 bytes)
[   19.979696] Console: colour VGA+ 80x25
[   19.980214] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[   19.980543] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[   19.991292] Memory: 445112k/458688k available (1993k kernel code, 12988k reserved, 900k data, 328k init, 0k highmem)
[   19.991301] virtual kernel memory layout:
[   19.991302]     fixmap  : 0xfff4e000 - 0xfffff000   ( 708 kB)
[   19.991303]     pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
[   19.991304]     vmalloc : 0xdc800000 - 0xff7fe000   ( 559 MB)
[   19.991305]     lowmem  : 0xc0000000 - 0xdbff0000   ( 447 MB)
[   19.991306]       .init : 0xc03d9000 - 0xc042b000   ( 328 kB)
[   19.991307]       .data : 0xc02f24c9 - 0xc03d36d4   ( 900 kB)
[   19.991308]       .text : 0xc0100000 - 0xc02f24c9   (1993 kB)
[   19.991312] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[   20.070023] Calibrating delay using timer specific routine.. 6427.32 BogoMIPS (lpj=12854644)
[   20.070067] Security Framework v1.0.0 initialized
[   20.070074] SELinux:  Disabled at boot.
[   20.070090] Mount-cache hash table entries: 512
[   20.070229] CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000649d 00000000 00000000
[   20.070237] monitor/mwait feature present.
[   20.070239] using mwait in idle threads.
[   20.070245] CPU: Trace cache: 12K uops, L1 D cache: 16K
[   20.070248] CPU: L2 cache: 2048K
[   20.070250] CPU: Physical Processor ID: 0
[   20.070253] CPU: After all inits, caps: bfebfbff 20100000 00000000 00003180 0000649d 00000000 00000000
[   20.070266] Compat vDSO mapped to ffffe000.
[   20.070270] Remapping vsyscall page to ffffe000
[   20.070285] Checking 'hlt' instruction... OK.
[   20.086081] SMP alternatives: switching to UP code
[   20.086462] Early unpacking initramfs... done
[   20.286113] ACPI: Core revision 20060707
[   20.290136] ACPI: Looking for DSDT in initramfs... file /DSDT.aml not found, using machine DSDT.
[   20.295071] CPU0: Intel(R) Pentium(R) 4 CPU 3.20GHz stepping 03
[   20.295103] SMP alternatives: switching to SMP code
[   20.295275] Booting processor 1/1 eip 3000
[   20.305815] Initializing CPU#1
[   20.385019] Calibrating delay using timer specific routine.. 6419.94 BogoMIPS (lpj=12839898)
[   20.385029] CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000649d 00000000 00000000
[   20.385036] monitor/mwait feature present.
[   20.385043] CPU: Trace cache: 12K uops, L1 D cache: 16K
[   20.385046] CPU: L2 cache: 2048K
[   20.385048] CPU: Physical Processor ID: 0
[   20.385051] CPU: After all inits, caps: bfebfbff 20100000 00000000 00003180 0000649d 00000000 00000000
[   20.385564] CPU1: Intel(R) Pentium(R) 4 CPU 3.20GHz stepping 03
[   20.385609] Total of 2 processors activated (12847.27 BogoMIPS).
[   20.386366] ENABLING IO-APIC IRQs
[   20.386686] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[   20.532568] checking TSC synchronization across 2 CPUs: passed.
[    0.003984] Brought up 2 CPUs
[    0.359328] migration_cost=196
[    0.359633] Booting paravirtualized kernel on bare hardware
[    0.359740] Time: 14:25:10  Date: 06/04/108
[    0.359774] NET: Registered protocol family 16
[    0.359875] EISA bus registered
[    0.359881] ACPI: bus type pci registered
[    0.367815] PCI: PCI BIOS revision 2.10 entry at 0xfb170, last bus=1
[    0.367818] PCI: Using configuration type 1
[    0.367819] Setting up standard PCI resources
[    0.380855] ACPI: Interpreter enabled
[    0.380858] ACPI: Using IOAPIC for interrupt routing
[    0.381557] ACPI: PCI Root Bridge [PCI0] (0000:00)
[    0.381563] PCI: Probing PCI hardware (bus 00)
[    0.382848] Boot video device is 0000:01:00.0
[    0.382908] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[    0.418731] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 *10 11 12)
[    0.419060] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 6 7 10 *11 12)
[    0.419388] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 6 7 10 *11 12)
[    0.419718] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 7 10 11 12) *5
[    0.420009] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 10 11 12) *0, disabled.
[    0.420300] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 6 7 10 11 12) *0, disabled.
[    0.420585] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 6 7 10 11 12) *0, disabled.
[    0.420870] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 6 7 10 11 12) *0, disabled.
[    0.421274] ACPI: PCI Interrupt Link [ALKA] (IRQs 20) *0, disabled.
[    0.421677] ACPI: PCI Interrupt Link [ALKB] (IRQs 21) *0, disabled.
[    0.422100] ACPI: PCI Interrupt Link [ALKC] (IRQs 22) *0, disabled.
[    0.422502] ACPI: PCI Interrupt Link [ALKD] (IRQs 23) *0, disabled.
[    0.424727] Linux Plug and Play Support v0.97 (c) Adam Belay
[    0.424738] pnp: PnP ACPI init
[    0.428135] pnp: PnP ACPI: found 13 devices
[    0.428140] PnPBIOS: Disabled by ACPI PNP
[    0.428192] PCI: Using ACPI for IRQ routing
[    0.428195] PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
[    0.438962] NET: Registered protocol family 8
[    0.438964] NET: Registered protocol family 20
[    0.439307] pnp: 00:02: ioport range 0x4000-0x407f could not be reserved
[    0.439310] pnp: 00:02: ioport range 0x40f0-0x40ff could not be reserved
[    0.439313] pnp: 00:02: ioport range 0x500-0x50f has been reserved
[    0.439703] PCI: Bridge: 0000:00:01.0
[    0.439705]   IO window: disabled.
[    0.439711]   MEM window: c4000000-c5ffffff
[    0.439715]   PREFETCH window: c0000000-c3ffffff
[    0.439734] PCI: Setting latency timer of device 0000:00:01.0 to 64
[    0.439767] NET: Registered protocol family 2
[    0.486466] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
[    0.486554] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[    0.486631] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[    0.486665] TCP: Hash tables configured (established 16384 bind 8192)
[    0.486668] TCP reno registered
[    0.502495] checking if image is initramfs... it is
[    0.902394] Freeing initrd memory: 5273k freed
[    0.903176] audit: initializing netlink socket (disabled)
[    0.903196] audit(1215181510.544:1): initialized
[    0.903397] VFS: Disk quotas dquot_6.5.1
[    0.903422] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    0.903486] io scheduler noop registered
[    0.903489] io scheduler anticipatory registered
[    0.903492] io scheduler deadline registered
[    0.903504] io scheduler cfq registered (default)
[    0.903592] PCI: Bypassing VIA 8237 APIC De-Assert Message
[    0.903864] isapnp: Scanning for PnP cards...
[    1.254521] isapnp: No Plug & Play device found
[    1.281512] Real Time Clock Driver v1.12ac
[    1.281576] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[    1.281703] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    1.281837] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[    1.282391] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    1.282609] 00:09: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[    1.282793] ACPI: PCI Interrupt 0000:00:0b.0[A] -> GSI 19 (level, low) -> IRQ 16
[    1.282803] ACPI: PCI interrupt for device 0000:00:0b.0 disabled
[    1.282884] mice: PS/2 mouse device common for all mice
[    1.283561] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[    1.283736] input: Macintosh mouse button emulation as /class/input/input0
[    1.283784] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[    1.283791] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[    1.284114] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[    1.284472] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.284477] serio: i8042 AUX port at 0x60,0x64 irq 12
[    1.284593] EISA: Probing bus 0 at eisa.0
[    1.284617] Cannot allocate resource for EISA slot 4
[    1.284636] EISA: Detected 0 cards.
[    1.314762] TCP cubic registered
[    1.314773] NET: Registered protocol family 1
[    1.314798] Starting balanced_irq
[    1.314807] Using IPI No-Shortcut mode
[    1.314895] input: AT Translated Set 2 keyboard as /class/input/input1
[    1.314990] ACPI: (supports S0 S3 S4 S5)
[    1.315044]   Magic number: 0:165:434
[    1.315569] Freeing unused kernel memory: 328k freed
[    1.315803] Time: tsc clocksource has been installed.
[    2.382985] Capability LSM initialized
[    2.414404] ACPI (exconfig-0455): Dynamic SSDT Load - OemId [ PmRef] OemTableId [ Cpu1Ist] [20060707]
[    2.414452] ACPI Exception (acpi_processor-0677): AE_NOT_FOUND, Processor Device is not present [20060707]
[    2.414461] ACPI Exception (acpi_processor-0677): AE_NOT_FOUND, Processor Device is not present [20060707]
[    2.726156] SCSI subsystem initialized
[    2.731937] libata version 2.20 loaded.
[    2.733682] sata_via 0000:00:0f.0: version 2.1
[    2.734355] ACPI: PCI Interrupt Link [ALKA] BIOS reported IRQ 0, using IRQ 20
[    2.734361] ACPI: PCI Interrupt Link [ALKA] enabled at IRQ 20
[    2.734376] ACPI: PCI Interrupt 0000:00:0f.0[B] -> Link [ALKA] -> GSI 20 (level, low) -> IRQ 17
[    2.734410] sata_via 0000:00:0f.0: routed to hard irq line 11
[    2.734479] ata1: SATA max UDMA/133 cmd 0x00019000 ctl 0x00019402 bmdma 0x0001a000 irq 17
[    2.734520] ata2: SATA max UDMA/133 cmd 0x00019800 ctl 0x00019c02 bmdma 0x0001a008 irq 17
[    2.734541] scsi0 : sata_via
[    2.938337] ata1: SATA link down 1.5 Gbps (SStatus 0 SControl 300)
[    2.948425] ATA: abnormal status 0x7F on port 0x00019007
[    2.948447] scsi1 : sata_via
[    3.153636] ata2: SATA link down 1.5 Gbps (SStatus 0 SControl 300)
[    3.163722] ATA: abnormal status 0x7F on port 0x00019807
[    3.198401] VP_IDE: IDE controller at PCI slot 0000:00:0f.1
[    3.198427] ACPI: PCI Interrupt 0000:00:0f.1[A] -> Link [ALKA] -> GSI 20 (level, low) -> IRQ 17
[    3.198444] VP_IDE: chipset revision 6
[    3.198447] VP_IDE: not 100% native mode: will probe irqs later
[    3.198463] VP_IDE: VIA vt8237 (rev 00) IDE UDMA133 controller on pci0000:00:0f.1
[    3.198475]     ide0: BM-DMA at 0xa800-0xa807, BIOS settings: hda:DMA, hdb:pio
[    3.198496]     ide1: BM-DMA at 0xa808-0xa80f, BIOS settings: hdc:DMA, hdd:DMA
[    3.198510] Probing IDE interface ide0...
[    3.616246] hda: ST3160212A, ATA DISK drive
[    4.286420] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[    4.286460] Probing IDE interface ide1...
[    5.151213] hdc: HL-DT-STDVD-ROM GDR8163B, ATAPI CD/DVD-ROM drive
[    5.932642] hdd: SONY DVD RW DW-Q30A, ATAPI CD/DVD-ROM drive
[    5.994831] ide1 at 0x170-0x177,0x376 on irq 15
[    6.002027] hda: max request size: 512KiB
[    6.044878] hda: Host Protected Area detected.
[    6.044881]  current capacity is 312579695 sectors (160040 MB)
[    6.044882]  native  capacity is 312581808 sectors (160041 MB)
[    6.169157] hda: Host Protected Area disabled.
[    6.169161] hda: 312581808 sectors (160041 MB) w/2048KiB Cache, CHS=19457/255/63, UDMA(100)
[    6.193484] hda: cache flushes supported
[    6.193532]  hda: hda1 hda2 hda4 < hda5 hda6 hda7 >
[    6.276657] hdc: ATAPI 52X DVD-ROM drive, 256kB Cache, UDMA(33)
[    6.276672] Uniform CD-ROM driver Revision: 3.20
[    6.283838] hdd: ATAPI 48X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, UDMA(66)
[    6.690584] usbcore: registered new interface driver usbfs
[    6.690616] usbcore: registered new interface driver hub
[    6.690651] usbcore: registered new device driver usb
[    6.691920] USB Universal Host Controller Interface driver v3.0
[    6.692523] ACPI: PCI Interrupt Link [ALKB] BIOS reported IRQ 0, using IRQ 21
[    6.692528] ACPI: PCI Interrupt Link [ALKB] enabled at IRQ 21
[    6.692538] ACPI: PCI Interrupt 0000:00:10.0[A] -> Link [ALKB] -> GSI 21 (level, low) -> IRQ 18
[    6.692555] uhci_hcd 0000:00:10.0: UHCI Host Controller
[    6.692724] uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 1
[    6.692758] uhci_hcd 0000:00:10.0: irq 18, io base 0x0000ac00
[    6.692895] usb usb1: configuration #1 chosen from 1 choice
[    6.692930] hub 1-0:1.0: USB hub found
[    6.692938] hub 1-0:1.0: 2 ports detected
[    6.798243] ACPI: PCI Interrupt 0000:00:10.1[A] -> Link [ALKB] -> GSI 21 (level, low) -> IRQ 18
[    6.798263] uhci_hcd 0000:00:10.1: UHCI Host Controller
[    6.798296] uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 2
[    6.798326] uhci_hcd 0000:00:10.1: irq 18, io base 0x0000b000
[    6.798478] usb usb2: configuration #1 chosen from 1 choice
[    6.798519] hub 2-0:1.0: USB hub found
[    6.798531] hub 2-0:1.0: 2 ports detected
[    6.905796] ACPI: PCI Interrupt 0000:00:10.2[B] -> Link [ALKB] -> GSI 21 (level, low) -> IRQ 18
[    6.905808] uhci_hcd 0000:00:10.2: UHCI Host Controller
[    6.905836] uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 3
[    6.905860] uhci_hcd 0000:00:10.2: irq 18, io base 0x0000b400
[    6.905994] usb usb3: configuration #1 chosen from 1 choice
[    6.906035] hub 3-0:1.0: USB hub found
[    6.906046] hub 3-0:1.0: 2 ports detected
[    7.013441] ACPI: PCI Interrupt 0000:00:10.3[B] -> Link [ALKB] -> GSI 21 (level, low) -> IRQ 18
[    7.013453] uhci_hcd 0000:00:10.3: UHCI Host Controller
[    7.013481] uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 4
[    7.013504] uhci_hcd 0000:00:10.3: irq 18, io base 0x0000b800
[    7.013635] usb usb4: configuration #1 chosen from 1 choice
[    7.013678] hub 4-0:1.0: USB hub found
[    7.013690] hub 4-0:1.0: 2 ports detected
[    7.121230] ACPI: PCI Interrupt 0000:00:10.4[C] -> Link [ALKB] -> GSI 21 (level, low) -> IRQ 18
[    7.121250] ehci_hcd 0000:00:10.4: EHCI Host Controller
[    7.121287] ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus number 5
[    7.121342] ehci_hcd 0000:00:10.4: irq 18, io mem 0xc7000000
[    7.121351] ehci_hcd 0000:00:10.4: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[    7.121439] usb usb5: configuration #1 chosen from 1 choice
[    7.121473] hub 5-0:1.0: USB hub found
[    7.121482] hub 5-0:1.0: 8 ports detected
[    7.164882] usb 1-2: new full speed USB device using uhci_hcd and address 2
[    7.292361] Attempting manual resume
[    7.292366] swsusp: Resume From Partition 3:7
[    7.292367] PM: Checking swsusp image.
[    7.314234] PM: Resume from disk failed.
[    7.343698] kjournald starting.  Commit interval 5 seconds
[    7.343706] EXT3-fs: mounted filesystem with ordered data mode.
[    8.237794] usb 5-2: new high speed USB device using ehci_hcd and address 2
[    8.370335] usb 5-2: configuration #1 chosen from 1 choice
[    8.608718] usb 5-5: new high speed USB device using ehci_hcd and address 3
[    8.742512] usb 5-5: configuration #1 chosen from 1 choice
[   16.469246] input: PC Speaker as /class/input/input2
[   16.522688] parport: PnPBIOS parport detected.
[   16.522744] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
[   17.036574] 8139too Fast Ethernet driver 0.9.28
[   17.036669] ACPI: PCI Interrupt 0000:00:13.0[A] -> GSI 18 (level, low) -> IRQ 19
[   17.036996] eth0: RealTek RTL8139 at 0xdc86c000, 00:14:85:e7:38:88, IRQ 19
[   17.037000] eth0:  Identified 8139 chip type 'RTL-8100B/8139D'
[   17.049671] 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
[   17.065765] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[   17.067939] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   17.194372] Linux agpgart interface v0.102 (c) Dave Jones
[   17.196014] agpgart: Detected VIA VT3314 chipset
[   17.225258] agpgart: AGP aperture is 512M @ 0xa0000000
[   17.829629] eth0: link down
[   17.850093] input: ImExPS/2 Generic Explorer Mouse as /class/input/input3
[   17.876019] usbcore: registered new interface driver libusual
[   17.971432] Initializing USB Mass Storage driver...
[   17.971615] scsi2 : SCSI emulation for USB Mass Storage devices
[   17.971704] usbcore: registered new interface driver usb-storage
[   17.971709] USB Mass Storage support registered.
[   17.971713] usb-storage: device found at 3
[   17.971715] usb-storage: waiting for device to settle before scanning
[   18.032119]
[   18.032124]  _____     ____    _    ____
[   18.032126] |__  /   _|  _ \  / \  / ___|
[   18.032128]   / / | | | | | |/ _ \ \___ \
[   18.032131]  / /| |_| | |_| / ___ \ ___) |
[   18.032133] /____\__, |____/_/   \_\____/
[   18.032135]      |___/
[   18.032138] ZD1211B - version 2.22.0.0-development
[   18.079474] vendor_id = 0ace
[   18.079478] product_id = 1215
[   18.079480] USB 2.0 Host
[   18.079524] Release Ver = 4810
[   18.079529] EEPORM Ver = 4810
[   18.093917] Finsih download Firmware. Ready to reboot
[   18.107255] PA type: 0
[   18.107263] PHYNEWLayout = 1
[   18.107266] Airoha AL2230S_RF
[   18.147116] zd1205_config: EEP(HWFeature)=0x80
[   18.151157] AllowedChannel = 000107ff
[   18.151159] Region:16
[   18.162231] ACPI: PCI Interrupt Link [ALKC] BIOS reported IRQ 0, using IRQ 22
[   18.162237] ACPI: PCI Interrupt Link [ALKC] enabled at IRQ 22
[   18.162250] ACPI: PCI Interrupt 0000:00:11.5[C] -> Link [ALKC] -> GSI 22 (level, low) -> IRQ 20
[   18.162418] PCI: Setting latency timer of device 0000:00:11.5 to 64
[   18.478359] usbcore: registered new interface driver zd1211b
[   18.920962] fuse init (API version 7.8)
[   18.930479] NET: Registered protocol family 17
[   18.959579] lp0: using parport0 (interrupt-driven).
[   18.988841] Adding 3574420k swap on /dev/disk/by-uuid/b04de8bb-54ad-47eb-9992-e8838cb5b6d0.  Priority:-1 extents:1 across:3574420k
[   19.270741] EXT3 FS on hda2, internal journal
[   22.955624] usb-storage: device scan complete
[   22.956853] scsi 2:0:0:0: Direct-Access     Generic  IC1210        CF 1.9C PQ: 0 ANSI: 0 CCS
[   22.957960] scsi 2:0:0:1: Direct-Access     Generic  IC1210        MS 1.9C PQ: 0 ANSI: 0 CCS
[   22.959087] scsi 2:0:0:2: Direct-Access     Generic  IC1210    MMC/SD 1.9C PQ: 0 ANSI: 0 CCS
[   22.960352] scsi 2:0:0:3: Direct-Access     Generic  IC1210        SM 1.9C PQ: 0 ANSI: 0 CCS
[   23.023078] sd 2:0:0:0: Attached scsi removable disk sda
[   23.025784] sd 2:0:0:1: Attached scsi removable disk sdb
[   23.027233] sd 2:0:0:2: Attached scsi removable disk sdc
[   23.035650] sd 2:0:0:3: Attached scsi removable disk sdd
[   23.146328] sd 2:0:0:0: Attached scsi generic sg0 type 0
[   23.146373] sd 2:0:0:1: Attached scsi generic sg1 type 0
[   23.146415] sd 2:0:0:2: Attached scsi generic sg2 type 0
[   23.146460] sd 2:0:0:3: Attached scsi generic sg3 type 0
[   29.755788] kjournald starting.  Commit interval 5 seconds
[   29.755943] EXT3 FS on hda5, internal journal
[   29.755950] EXT3-fs: mounted filesystem with ordered data mode.
[   29.904668] NTFS driver 2.1.28 [Flags: R/O MODULE].
[   29.952513] NTFS volume version 3.1.
[   32.795331] input: Power Button (FF) as /class/input/input4
[   32.795372] ACPI: Power Button (FF) [PWRF]
[   32.795433] input: Power Button (CM) as /class/input/input5
[   32.795458] ACPI: Power Button (CM) [PWRB]
[   32.903478] Using specific hotkey driver
[   32.959056] No dock devices found.
[   32.992011] ibm_acpi: ec object not found
[   36.795980] apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
[   36.795987] apm: disabled - APM is not SMP safe.
[  120.178317] Bluetooth: Core ver 2.11
[  120.178421] NET: Registered protocol family 31
[  120.178425] Bluetooth: HCI device and connection manager initialized
[  120.178430] Bluetooth: HCI socket layer initialized
[  120.277166] Bluetooth: L2CAP ver 2.8
[  120.277174] Bluetooth: L2CAP socket layer initialized
[  120.281665] Bluetooth: RFCOMM socket layer initialized
[  120.281693] Bluetooth: RFCOMM TTY layer initialized
[  120.281697] Bluetooth: RFCOMM ver 1.8
[  120.806839] keybuf data [0]:
[  120.806846]
[  120.806851] Just Update WEP key
[  187.942726] NET: Registered protocol family 10
[  187.942884] lo: Disabled Privacy Extensions
[  187.942969] ADDRCONF(NETDEV_UP): eth0: link is not ready
[  187.942974] ADDRCONF(NETDEV_UP): eth1: link is not ready
[  203.821180] keybuf data [0]:
[  203.821188]
[  203.821191] Just Update WEP key
[  203.821351] keybuf data [0]:
[  203.821355]
[  203.821358] Just Update WEP key
[  203.821374] keybuf data [0]:
[  203.821377]
[  203.821380] Just Update WEP key
[  203.821394] keybuf data [0]:
[  203.821397]
[  203.821400] Just Update WEP key
[  205.826834] keybuf data [5]:
[  205.826842] 72<7> <7>61<7> <7>6d<7> <7>62<7> <7>6f<7> <7>
[  205.898199] Update CardSetting
[  206.105347] keybuf data [0]:
[  206.105352]
[  206.105355] Just Update WEP key
[  206.105419] keybuf data [0]:
[  206.105431]
[  206.105434] Just Update WEP key
[  206.632310] ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[  221.929131] eth1: no IPv6 routers present
miguel@gustavo:~$

Hola Tostada, justo cuando te sale ese error, te vas a una terminal y tecleas dmesg , al final del todo te saldrá más información sobre lo que ha ocasionado ese error de HAL. ¿podrías pegarlo aquí a ver si te podemos ayudar? Normalmente suele ser provocado por una solicitud de interrupción al sistema un poco extraña...


Y leemos

Capa de abstracción del hardware

HAL proporciona una visión abstracta del «hardware»

Esta capa de abstracción es simplemente una interfaz que hace posible añadir soporte para dispositivos nuevos y nuevas formas de conectarlos al ordenador, sin modificar cada aplicación que use el dispositivo. Mantiene una lista de los dispositivos que existen actualmente, y puede proporcionar información sobre ellos bajo demanda.

No puede ser. Tengo 30 Gigas libres. Debe haber algún error de otro tipo o en el cómo el Sistema interpreta mi /home. No está lleno, está en otra partición y tiene espacio más que de sobra.

Gracias. Necesito más ayuda.

Hola, tienes el home lleno, debes descargar guadalinex para ello  a mi me va muy bien con el partition magic desde wxp pero puedes intentarlo desde un disco de instalacion.
http://www.guadalinex.org/participa/foros/hilo/17673.
Un saludo, luego nos cuentas.

Holas:

Cuando arranco mi sistema y se carga y se está cargando Desktop me aparece una pantalla con el mensaje:

Failed to initialize HAL!

Yo lo que hago es pinchar en esa ventana y se va pero a ver si so va a tener que ver con todas las cosas raras que me han ocurrido en estos días.

Gracias.